How to Use
Ready to go & Easy to use
THE EAZYPOST IS READY TO USE IN 3 SIMPLE STEPS & only REQUIRES A few basic TOOLS TO SET UP.
From complex construction jobs to home DIY, Eazypost can be used by professionals and amateurs alike:
- Fencers
- Landscapers
- Builders
- Gardeners
- Concreters
- Councils
- DIY Enthusiasts
TOOLS REQUIRED
Eazypost only requires equipment you’d find in most toolsheds or at any good hardware store.
Level
hammer
Drill
Screws
EAZYPOST SETUP
Prep
Dig post hole in required location. Lower post into hole and fill with concrete.
Step 1
Position EazyPost peg required distance from post and hammer into ground on a slight angle.
Step 2
Plumb post, and attach EazyPost by Screwing through arm or use EazyPost corner attachment (sold separately).
Step 3
Repeat process with second EazyPost to brace post in opposite direction.
& Reuse
Once concrete sets remove EazyPost, ready for the next job.
